To download the Project Guide to this video for 99 cents = www.homeownerseries.com www.homeownerseries.com Part 1 of 2 = http Part 2 of 2 = www.youtube.com Part Overview = www.youtube.com To view the Water Supply Valve Playlist = www.youtube.com Water Supply Valve Replacement Then with Rib Joint Pliers or an adjustable open-end wrench unscrew the water supply hose from the bottom of the toilet's fill valve shank. Now place one open-end adjustable wrench on the compression nut while placing the second wrench on the water supply valve itself. Once in position hold the water supply valve in place with one wrench while turning to loosen the compression nut with the second wrench. Once the compression nut is loose turn it by hand and remove the valve from the water pipe. When the old valve is removed the compression nut and ring will remain attached to the water supply line. These parts should be reused on the new water supply valve if they are in good condition. However, if corroded or otherwise damaged they will have to be cut off and replaced. Expect water to drain out of the pipe when the valve is removed so prepare to quickly switch valves. The water can be collected in a small bin that has been placed beneath the valve before removal. The new valve, which was made ready, needs to be fully inserted into the water pipe and aligned vertically. Screw the compression nut onto the water supply valve hand tight. Then take the two open-ended adjustable wrenches and tighten the ...
Keywords:
See Also : Finishing Products Pneumatic Plumbing
ไม่มีความคิดเห็น:
แสดงความคิดเห็น